Bicortical Screw and Needle Welded Together as Effective Implant Technique for Immediate Load of SINGLE Tooth in Aesthetic Zone Characterized by Severe Bony Reabsorption: Cases Report



Abstract Views
453

Downloads
440

Citations

Share

##plugins.themes.bootstrap3.article.sidebar##

Submitted May 3, 2021
Published May 24, 2021
10.24018/ejmed.2021.3.3.857

Abstract viewed = 453 times

Table of Contents

##plugins.themes.bootstrap3.article.main##

After a long period of time in which submerged implants were used just with delayed load, scientific evidence has led to immediate loading, finally re-evaluating the long lasting experience gotten with one-piece implants.

In aesthetic area, if bone is deep and wide, immediate load can be performed with any type of implants, with scarce risk of failure.

Situations in which bone is scarce are frequent and impose to choose between performing a suitable technique compatible with immediate loading or renouncing to immediate loading.

In our experience, implant technique based on the welding-in-mouth of a titanium needle to main implant is regularly destined to success, because the needle implant, deeply anchored to bone, compensates the lateral forces that normally push the tooth forward.

The long lasting experience accrued since over 30 years in our professional offices leads us to suggest this technique as a standard solution while dealing with bone reabsorption in the aesthetic area. We are certain that further studies will confirm our conclusions.

Keywords: Immediate implant, Aesthetic area, composed single implant, Welding machine

Downloads

Download data is not yet available.

References

  1. Wang X, Zhang T, Yang E, Gong Z, Shen H, Wu H, Zhang D. Biomechanical Analysis of Grafted and Nongrafted Maxillary Sinus Augmentation in the Atrophic Posterior Maxilla with Three-Dimensional Finite Element Method. Scanning. 2020 Oct 2;2020:8419319. PMID: 33093935.
     Google Scholar
  2. Alagl AS, Madi M. Localized ridge augmentation in the anterior maxilla using titanium mesh, an alloplast, and a nano-bone graft: a case report. Journal of International Medical Research 2018, Vol. 46(5) 2001–2007. PMID: 29529906
     Google Scholar
  3. Pasqualini U, Pasqualini ME. Treatise of Implant Dentistry. 2009 Ariesdue Carimate (CO). PMID: 28125196.
     Google Scholar
  4. Hsu YT, Fu JH, Al-Hezaimi K, Wang HL. Biomechanical Implant Treatment Complications: A Systematic Review of Clinical Studies of Implants with at Least 1 Year of Functional Loading. International Journal of Oral & Maxillofacial Implants. 2012, Vol. 27 Issue 4, p894-904. PMID: 22848892.
     Google Scholar
  5. Braut V, Bornstein MM, Belser U, Buser D. Thickness of the anterior maxillary facial bone wall-a retrospective radiographic study using cone beam computed tomography. Int J Periodontics Restorat Dent 2011; 31(2): 125-31. PMID: 21491011.
     Google Scholar
  6. Apolloni M: Atlante pratico di implantologia dentale. 1989 Edi Ermes Ed. Milano.
     Google Scholar
  7. Pasqualini ME, Mangini F, Colombo A, Manenti PA, Rossi F. Stabilizzazione di impianti emergenti a carico immediato. Saldatrice endorale. Dental Cadmos 2001;9:67.
     Google Scholar
  8. Pasqualini M, Rossi F, Carlo LD, Comola G. Rehabilitations of a single element with one-piece implants with electrowelded needles: A different approach. Dent Res J (Isfahan). 2018 Nov-Dec;15(6):447-452. PMID: 30534174.
     Google Scholar
  9. Garbaccio D.: The Garbaccio bicortical self-threading screw. Riv Odontostomatol Implantoprotesi. Jan-Feb 1983;(1):53-6. PMID: 6350959.
     Google Scholar
  10. Rossi F, Pasqualini Me, Dal Carlo L, Shulman M, Nardone M, et al. (2015) Immediate loading of maxillary one-piece screw implants utilizing intraoral welding: a case report. J Oral Implantol 41(4): 473-475. PMID: 25647017.
     Google Scholar
  11. Wang K, Li DH, Zhou JX, Zhang CJ, Liu BL, Li YL. Influence of bicortical anchorage on the natural frequencies of dental implant. Hua Xi Kou Qiang Yi Xue Za Zhi. 2006 Feb;24(1):86-8. Chinese. PMID: 16541668.
     Google Scholar
  12. Thomé G, Caldas W, Bernardes SR, Cartelli CA, Gracher AHP, Trojan LC. Implant and prosthesis survival rates of full-arch immediate prostheses supported by implants with and without bicortical anchorage: Up to 2 years of follow-up retrospective study. Clin Oral Implants Res. 2020 Nov 19. PMID: 33211323.
     Google Scholar
  13. Mondani P.L., Mondani P.M.: The Pierluigi Mondani intraoral electric solder. Principles of development and explanation of the solder using syncrystallization. - Riv Odontostomatol Implantoprotesi. 1982 Jul-Aug;(4):28-32. PMID: 6130503.
     Google Scholar
  14. Dal Carlo L, Pasqualini Me, Mondani Pm, Rossi F, Moglioni E, Shulman M: Mondani intraoral welding: historical process and main practical applications. J of Biol Regulators & Homeostatic Agents 2017; Vol. 31, no. 2 (S1). PMID: 28691478.
     Google Scholar
  15. Dal Carlo L.: Jig – Replace – Novoie V Stomatologii, Moskow, 4/160/2009:36-41.
     Google Scholar
  16. Dal Carlo L., Dal Carlo Z.: Elementi di Selezione degli impianti endoossei. 2020 Edizioni Accademiche Italiane, Chap. 15:182-189.
     Google Scholar


Most read articles by the same author(s)